Kinderkraft LUNKY Manual De Usuario página 14

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
Cot with high sides: To prevent injury from falls, if the child is able to climb out of
the cot, the cot shall no longer be used for that child.
The bed is intended for children from birth to 4 years of age. Note! The sofa-bed
function of the baby cot is intended for children from 18 months to 4 years of age.
For transport or storage it is possible to disconnect the main parts of the cot.
1. List of cot components - page 4
1
Front (x2)
2
Side wall (x2)
3
Bottom
4
Side panel
5
Left leg (x2)
6
Right leg (x2)
7*
Mattress
2. Cot assembly:
The installation should take place on a soft surface that will not damage the surface of the elements.
Installation should be carried out by two people. Start assembling the cot by connecting the element (1) and
legs (5,6) with the confirmat (D) and the Allen key (F) included in the set (fig. I). Repeat the same operation
on the second element (1). Connect the resulting elements to the bottom (3) with the mounting kit (B) + (E)
and Allen key (fig. II). ATTENTION: The cot has a 3-step bottom height adjustment. Connect the side (2) to
the structure assembled in the previous steps by screwing it in with screws (C) and an Allen key (fig. IIIa).
Repeat the same operation on the other side. To use is as a toddler bed, remove one of the sides (2)
beforehand, and install it there using the screws (B) and wheel nuts (E) on the side (4) (fig IIIb). In addition,
connect the centre of the side panel (4) to the bottom using screw A and nut E. NOTE: The toddler bed can
only be used with the bottom in the lowest position. The cot is ready for use once the mattress is inserted
and all attachments are firmly secured (7* - CAUTION! The cot is available in two versions: with or without
a mattress).
3. Maintenance and cleaning
Frame - clean with a soft, clean and dry cloth.
Handwash.
Do not bleach
Do not dry in a tumble dryer
Do not fold or store the product when it is wet and never store it in wet conditions, as it can lead to mould
growth.
4. Warranty
A
Screw M6 x 75
B
Screw M6x55 (x7)
C
Screw M6x42 (x8)
D
Confirmat 7 x 40 (x8)
E
Wheel nut M6 x 15 (x8)
F
Allen key
Do not wash. Clean the product gently
with a damp cloth and a mild detergent.
Do not iron
Do not dry clean
14

Publicidad

Tabla de contenido
loading

Tabla de contenido