Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
5
.....
CONNECTING A POWER TOOL TO THE VACUUM CLEANER
-
Plug the power tool into the socket on the motor unit (A) fig. "A7";
then plus the vacuum into the power supply.
CAUTION:
• The plug is designed for power tools with a maximum power rating of
• NEVER plug in power tools with a higher rating.
• NEVER plug more than one power tool into the socket on the motor unit.
B - FILTER SYSTEMS
1
.....
USING THE OPTIONAL COLLECTION BAG
CAUTION:
Use the PE collection bag with the cartridge filter
and basket (g) mounted.
-
Fit the paper filter bag into the drum fig."B1".
-
Fit the plastic flange (x) onto the air inlet connector (y). Make sure you do not rip the bag
fig. "B2".
-
The bag must fit over the upper rim of the drum fig. "B3".
-
Fit the basket (g) into the drum fig."B4".
TIPS FOR USING THE
CAUTION:
Not suitable for sharp materials.
-
Change when vacuumed material fills approx. 3/4 of its capacity.
-
Do not reuse. Always keep a spare pack of bags handy.
2
.....
USING THE FILTER
-
Place the filter (b) on the motor housing (c) fig. "B5".
-
Fit the plastic disk (a) on the filter (b) fig. "B6".
We strongly recommend using the cartridge to vacuum dust
and solid debris; it can be used with the collection bag that
helps prevent the filter from clogging and has the advanta-
ge of making the disposal of vacuumed debris quick and
sanitary.
CAUTION:
Not suitable for sharp or damp materials.
2000 W.
COLLECTION BAG
- 20 -
Cod.
83 139H0B *
Cod.
83 140H0G *
*
Pack code
Publicidad
Tabla de contenido
