Publicidad
Idiomas disponibles
Idiomas disponibles
MO9588
EN
LED clock with wireless charger
1. The display & buzzer will power on whilst connect to the power
cable. The wireless charge green indicator will also light up.
2. Touch the "
(high bright – medium bright – low bright – turn off)
3. Touch the "☽" button with short press to adjust night light (high
bright – medium bright – low bright – turn off)
4. Time setting: Press "M" and hold for 3 sec into time setting
mode: 12 HR/24HR, hour/min/year/month/date/ day, press "˅"
and "˄" button to adjust it.
5. Alarm setting: Press "S" and hold for 3 sec, into alarm setting
mode, press "˄" button to activate or disarm alarm, "
signal will be on or off. The alarm will last 2 min, then will turn off
automatically. By pressing "˅" or "˄" can turn off alarm.
6. Temperature C/F setting. Press "˅" to choose C or F.
7. Snooze: when alarm on, press the top panel, it will enter snooze
mode "Zz" flashing. The alarm will repeat every 5 min. The
alarm will turn off after 2 minutes.
8. Wireless charge mode: green light is power on indicator. When
charging, red light is on. If red/green light is blinking, this means
it is not in charging mode.
9. Power back up (for the clock only): Use 1x CR2032 battery to
keep the clock running during power failure. No need to reset
the clock after power on again.
Product specifications:
Input:
Output:
Charging efficiency:
Precaution!
Metal object placed on top of charging devices might result in the
product malfunctioning and damage caused to the charging
device.
Do not operate the item on top of any metal table or surface.
" button with short press to adjust clock back light
DC 9V/1.5A
DC 5V/1A
75%
" alarm
Publicidad
