Anynet + menu
The Anynet + menu changes depending on the type and status of the Anynet + devices connected to the TV.
Anynet + menu
View TV
Record
(Device_name) menu
(Device_name) Operation
Connect (Device_name)
Receiver
Setup
TV Remote Control buttons Available in Anynet + mode
Device Type
Anynet + Device
Device with built-in Tuner
Audio Device
The Anynet + function only works when the active source on the TV remote control is set to TV.
The REC button works only while in the recordable state.
You cannot control Anynet + devices using the buttons on the side of the TV. You can control Anynet + devices only using the
TV remote control.
The TV remote control may not work under certain conditions. In this case, reselect the Anynet + device.
The Anynet + functions do not operate with other manufacturers' products.
The ◄◄, ►► operations may differ depending on the device.
Recording
you can make a recording of a TV program using a recorder.
Press the REC button.
Recording begins. (Only when the Anynet + enabled recording device is connected.)
You can record the source streams by selecting "Record" after pressing the Anynet + button.
Pressing the REC button will record whatever you are currently watching. If you are watching video from another device, the
video from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an
antenna to a recording device, refer to the recording devices users manual.
All manuals and user guides at all-guides.com
Switches from Anynet + to TV broadcast mode.
Starts a recording. (This menu works only for a device supporting recording.)
Shows the menu of the connected device.
Example: When a DVD Recorder is connected, the DVD Recorder's title menu appears.
Shows the play control menu of the connected device.
Example: When a DVD Recorder is connected, the play control menu of the DVD
Recorder appears.
Your TV connects to the corresponding device.
Sound is output through the receiver (home theater).
You can set the Anynet + (HDMI-CEC), auto turn off, and searching connections for
using Anynet + .
Operating Status
After switching to the device, when the menu of the
corresponding device is displayed on the screen.
After switching to the device, while playing a file
After switching to the device, when you are watching a TV
program
When Receiver is activated
English -
Description
Available buttons
Numeric buttons
▲/▼/◄/►/EnTER buttons
Color buttons
EXIT button
◄◄ (Backward search)
►►(Forward search)
(Stop)
►
(Play/Pause)
Ch ▲/▼ button
VOl +/- button
mUTE button