Changing The Screen Size - Samsung LN-T466F Manual Del Usuario

Changing the Screen Size

Occasionally, you may want to change the size of the image on your screen. Your TV comes with six screen size options, each designed
to work best with specific types of video input. Your cable box or satellite receiver may have its own set of screen sizes as well. In general,
though, you should view the TV in 16:9 mode as much as possible.
1. Press the mEnU button to display the menu.
Press the EnTER button, to select "Picture".
2. Press the ▲ or ▼ button to select "Size", then press the EnTER button.
3. Press the ▲ or ▼ button to select the screen format you want.
Press the EnTER button.
Press the ExIT button to exit.
• : : Sets the picture to 16:9 wide mode.
• Zoom : Magnifies the size of the picture on the screen.
• Zoom :Magnifies the size of the picture more than "Zoom1".
• Wide Fit : Enlarges the aspect ratio of the picture to fit the entire screen.
• : : Sets the picture to 4:3 normal mode.
• Just Scan : Use the function to see the full image without any cutoff when
HDMI (720p/1080i/1080p), Component (720p/1080i/1080p) or
DTV (1080i) signals are input.
Alternately, you can press the P.SIZE button on the remote control repeatedly to
change the picture size.
If you watch a still image or the 4:3 mode for a long time (over 2 hours), an image
may be burned onto the screen. View the TV in 16:9 mode as much as possible.
HD (High Definition)
16:9 - 1080i/1080p (1920x1080), 720p (1280x720)
:
Sets the picture to 16:9 wide mode.
Wide Fit
Enlarges the aspect ratio of the picture
to fit the entire screen.
• In TV, VIDEO, S-VIDEO and all COMPONENT (480i, 480p) modes, all screen modes can be selected.
(16:9, Zoom1, Zoom2, 4:3).
• You can select only the 16:9, 4:3 and Wide Fit screen sizes in the DTV(1080i), Component (720p, 1080i, 1080p) or
HDMI (720p, 1080i, 1080P) mode.
• In PC modes, only 16:9 & 4:3 modes can be selected.
• You must select Zoom with P.SIZE button on the remote if you want to move the Zoom 1 or 2 picture up or down.
• When watching a DTV's HD signal, you can use Wide Fit. Horizontal zoom (Wide Fit) sets the optical picture format by
expanding it both horizontally and vertically. For example, you can reset the picture in 4:3 format to 16:9. Wide Fit does not
support all external devices (DVD, VCR etc.).
• When Double ( , ) mode has been set in PIP, the Picture Size cannot be set.
All manuals and user guides at all-guides.com
Zoom
The screen size when Wide screen is
vertically enlarged.
:
Sets the picture to 4:3 normal
mode.
English - 
TV Picture
▲More
Color Tone : Cool
Detailed settings
Size :  : 
Digital nR : low
Active Color : On
Dnle : On
Reset : OK
move Enter
TV Size
 : 
Zoom
Zoom
Wide Fit
 : 
Just Scan
move Enter
Zoom
The screen size when the Zoom1
screen is vertically enlarged.
Just Scan
Use the function to see the full
image without any cutoff when
HDMI(720p/1080i/1080p), Component
(720p/1080i/1080p) or DTV (1080i)
signals are input.
►
►
►
►
►
►
►
Return
►
►
►
Return