Connecting Cable Tv - Samsung LN-T466F Manual Del Usuario

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.
Cable without a Cable box
1. Plug the incoming cable into the ANT 2 IN (CABLE) terminal on the back of the TV.
Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.
Connecting to a Cable box that Descrambles All Channels
1. Find the cable that is connected to the ANT OUT terminal on your cable box.
This terminal might be labeled "ANT OUT", "VHF OUT" or simply, "OUT".
2. Connect the other end of this cable to the ANT 2 IN (CABLE) terminal on the back of the TV.
Connecting to a Cable box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a
two-way splitter, an RF (A/B) switch, and four lengths of RF cable. (These items are available at most electronics stores.)
1. Find and disconnect the cable that is
connected to the ANT IN terminal on your
cable box.
This terminal might be labeled "ANT IN",
"VHF IN" or simply, "IN".
2. Connect this cable to a two-way splitter.
3. Connect an RF cable between the OUTPUT
terminal on the splitter and the IN terminal
on the cable box.
4. Connect an RF cable between the
ANT OUT terminal on the cable box and
the B–IN terminal on the RF(A/B) switch.
5. Connect another cable between the other
OUT terminal on the splitter and the A–IN
terminal on the RF (A/B) switch.
6. Connect the last RF cable between the
OUT terminal on the RF (A/B) switch and
the ANT 2 IN (CABLE) terminal on the rear
of the TV.
After you have made this connection, set the A/B switch to the "A" position for normal viewing. Set the A/B switch to the "B" position to
view scrambled channels. (When you set the A/B switch to "B", you will need to tune your TV to the cable box's output channel, which is
usually channel 3 or 4.)
All manuals and user guides at all-guides.com
Incoming
cable
Incoming
cable
Incoming
cable
Incoming
cable
Splitter
English - 
AnT In
AnT In
Incoming
cable
Splitter
Splitter
Splitter
Cable box
Splitter
Cable box
RF (A/b)
Switch
Cable box
ANT 2 IN
(CABLE)
AnT OUT
ANT 2 IN
(CABLE)
Cable box
RF (A/b)
Switch
RF (A/b)
Switch
AnT  In
(CAblE)
TV Rear