Delivery Contents - Raikko DANCE Instrucciones De Manejo

English
Introduction
Dear Customer,
Thank you for choosing
the instructions and safety and warning information in order to
ensure the correct use of your new product.

Delivery Contents

• 1 Dance loudspeaker
• 1 Connecting cable
• 1 Cloth bag
• 1 Operating Instructions
Overview
Connecting
cable/audio
BuddyPlug
10
All manuals and user guides at all-guides.com
DANCE Vacuum Speaker
. We ask you to carefully read
Volume +/-
On/Off
LED
Charge/AUX
Connecting cable
English
Deployment of the resonance space
To open the loudspeaker and for deployment of the full sound volume,
firmly take hold of the lower part with one hand and, with the upper
part firmly held by your other hand, rotate them against each other.
Important: Rotate the upper part of the loudspeaker anti-clockwise to
open the loudspeaker. Rotate clockwise to close the loudspeaker.
Now connect the loudspeaker to the headphone output socket
(3.5 mm) of an audio source via the connection cable rolled up
in the base. Should the length of the integrated cable not be
sufficient, you can also connect the loudspeaker via the audio plug of
the supplied USB cable.
Take note: Do not pull the opened loudspeakers apart, the built-in
spring develops the soundbox to a sufficient volume.
Switch on
Slide the on/off switch all the way to the left to switch the loudspeaker
on. The LED on the underside now lights up blue. Slide the on/off
switch all the way to the right to switch the loudspeaker off.
Volume
After switching on, the sound volume is set to a medium intensity.
Increase the sound volume by sliding the spring switch to the right
(VOL+), or decrease it by sliding it to the left (VOL-).
DANCE Vacuum Speaker
11