Candy Freespace Instrucciones De Uso página 7

Ocultar thumbs Ver también para Freespace:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

USING YOUR CLEANER
Power supply - Pull cord and plug into power supply (P4), Please make sure the cord is fully
extended before using the cleaner (do not pull the cord beyond the red marker). Press the on/off
pedal once to start the cleaner (P5). Press it again to stop the cleaner before removing the plug
after use. Press the cord rewind button to wind the power cord back into the cleaner (P6).
Fixed power control (depending on model) – Adjust the suction by moving the handle valve:
suction will decrease when opening the valve (P7). Use low suction for delicate fabrics.
Variable power control (depending on model) – Slide the variable power adjuster to increase
or decrease the power level (P8). Use low suction for delicate fabrics.
Telescopic Tube / Telescopic Tritube (depending on model) – The Telescopic Tube or Tritube
can be extended or collapsed by pressing the latches forward and pulling or pushing the tubes to
the desired length (P9).
Carpet & Floor Nozzle – Press pedal on the nozzle to lower the brush head when cleaning hard
floors (P10). Press the pedal again to lift the brush head when cleaning carpets.
Mini Turbo Nozzle (depending on model) – Use the Mini Turbo Nozzle (P11) for deep cleaning
on textile surfaces. Important: do not use the Mini Turbo Nozzle on rugs with long fringes, animal
hide and with carpet piles deeper than 15mm. Do not keep the nozzle stationary while the brush is
rotating.
Multifunction Tool – (P12) This tool can be used as:
1.
Crevice tool: for corners and hard to reach areas.
2.
Dusting brush: for bookshelves, frames, keyboards etc.
Furniture Nozzle (depending on model) – For soft furnishings and fabrics (P12).
Parking and storage – The Telescopic Tube or Tritube can be parked for temporary storage dur-
ing cleaning or in the storage position when not in use (P13 & P14).
Nanopack Storage System (depending on model) – The unique Nanopack Storage System al-
lows the cleaner to be stored in an ultra compact configuration with a significantly smaller storage
volume than other cleaners.
To store the cleaner using the Nanopack system:
1.
Detach the floor nozzle and hose handle from the Tritube then collapse the Tritube to its
minimum storage length (see 'Telescopic Tritube').
2.
Position the cleaner in the upright position and slot the tool storage bracket on the Tritube into
the recess located on the base of the cleaner (P15).
3.
Wrap the hose around the product before fitting the hose handle and floor nozzle into the
locations provided on the tool storage bracket (P16).
0565_5319 Freespace ML IM.indd 7
All manuals and user guides at all-guides.com
2
GB
20/01/2009 12:59:14

Publicidad

Tabla de contenido
loading

Tabla de contenido