Denver DMP371 Instrucciones De Uso página 8

6.Press play key, start playing.
7.To clear programing. press the "STOP"
key, then press "PROG" key to
program state, then press "STOP" key
,or open the door or power off.
Support Disc & File
CD-RW, CD-R, CD Disc playback
Multi-session Disc playback
MPEG 1(ISO/IEC 11172-3) Layer 1/2/3
All MPEG Bit Rates except 8kpbs and
free format
32/44.148KHz Sampling frequency
MPEG 2 Bit Rates except 8kpbs and free
format
16/22.02/24KHz Sampling frequency
Single channel, Dual channel, Stereo
and joint Stereo any combination of
intensity Stereo & MS Stereo Joliet and
Romeo format
MP3 DISC MODE KEY:
Press mode key
NORMAL REPEAT ONE
RND INTRO
REPEAT ONE:
REPEAT AL BUM:
REPEAT ALL ALBUM: "
INTR O:
RND:
ANTI SHOC K:
All manuals and user guides at all-guides.com
:
REPEAT ALBUM
REPEAT ALL ALBUM
" " light on display
and will repeat the
track you selected.
" ALBUM" Repeat
one directory.
ALL ALBUM"
light on display and
will repeat entire tracks.
At STOP state, press
MODE button until
"INTRO"light on d isplay
plays and will play the
first 10 seconds of
each track.
"RND" light on display
plays every tracks in
random order.
"ESP"light on display,
and will anti-shock a
bout 120 seconds.
English-7
DIR SELECT:
DISC:
PROGRAM:
1.At stop state,Press "PROG" key at STOP
state, Then "00" in "PGM 00 00P-01"display
2.Press skip/searched
the track Number.
3.Press down "PROG" key then "00P" in
"PGM 00 00P-01"
4.Press skip/searched
the track Number.
5.When desired track is display, press
PROGRAM key to register. Then track no.
display to "00" again.
6.Repeat 2-5 (up to 64 tracks) after register
64 tracks. display shows the first registered
track.
7.Registered tracks can be check by press
"PROG" key, and it can be changed by
repeat 2-5.
8.Press play key, starts playing.
9.To clear programing. press the STOP key
then press "PROG" key to program state,
then press "STOP" key, or open the door or
power off.
Press ESP/DIR key.
If no diSC, then "no
diSC" is display.
or key to search
or key to search