Denver DMP371 Instrucciones De Uso página 9

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 66
CONNECTION TO AN EXTERNAL UNIT
I
Use a commercially available connection
cord which has a 3.5mm stereo plug at
one and two phono plugs at the other end.
connect the stereo plug to the LINE OUT
jack of the unit and connect the phono
plugs to the analog input (AUX) terminals
of the external unit.
NOTE
Turn off the power of both units before
connection
DO NOT connect to the PHONES inputs
of an amplifier (with a built-in phono
equalizer amplifier)
Adjust the volume and BASS BOOST on
this unit.
I
LINE OUT
All manuals and user guides at all-guides.com
MAINTENANCE
To clean the lens
If the lens become dirty, the player will skip or
not play, If this occurs, clean the lens in the
following. manner, T o remove dust or dust
particles, first use a camera lens blower/brush
1 to blow a few times to loosen particles, then
gently brush the lens 2 clean finish by blowing
the lens again.
J
Note
Take care not to get too much solution on the
swab. which could flow into the unit and cause
damage. Pressing too strongly with the swab
could scratch or break the lens.
To clean the discs
Before playing, wipe the disc from the center
out with a cleaning cloth, After playing, store
the disc in its case.
LINE IN
R
L
CD IN
K
AUX
English-8
J
1
2
K

Publicidad

Tabla de contenido
loading

Tabla de contenido