Trust START-LINE ACM-2000 Manual Del Usuario página 7

9. Mount the receiver in the box
Mount the receiver in the wall or ceiling box (break off the mounting tabs if necessary) and cover it up
with a blind cover or mount the light back onto the ceiling again.
10. Manual operation with a Trust Smart Home transmitter
Press ON to switch the receiver on
Press OFF to switch the receiver off
Single code delete
A
Press the learn-button for 1 second. The learn-mode will be active for 12 seconds and the LED-
indicator will blink slowly.
B While the learn-mode is active, send an OFF-signal of a specific Trust Smart Home transmitter to
delete that code.
C
The LED will flash fast to confirm code deletion.
Full memory delete
A
Press and hold the learn-button on the receiver (approx. 6 sec.) untill the LED-indicator starts
blinking fast. The delete mode will be active for 12 seconds.
B While the delete mode is active, press the learn-button again for 1 second.
C
The LED will flash fast to confirm the memory has been cleared.
ACM-2000 BUILD-IN SWITCH
EN
7