Before Use; Using The Heater - KEKAI Little silver Manual De Instrucciones

KNOW YOUR HEATER
2
1
1. PILOT LAMP
4. ROTARY SWITCH

BEFORE USE

1. Before use, remove all packaging and inspect the appliance for any damages. If there are
appears to be any damages, please take back to place of purchase for a replacement.
2. Ensure that all the accessories are included as per diagram above before you can continue
with the installation.
3. Ensure that the location of the heater installed is not directly under a power socket and that a
power socket is available to power the appliances for use.
4. Refer to the installation guide for further instruction.

USING THE HEATER

OPERATING INSTRUCTIONS:
 Plug into any 230~50 Hz, AC source.
 Your heater is equipped with a 4-position rotary switch
2. THERMOSTAT
5. AIR OUTLET
SYMBOL FUNCTION
0 OFF
* Fan without heater
I 750W (Low heat output)
II 1500W(Full heat output)
4
3
5
3. SWING SWITCH
6. BASE