Optional Accessories
• M100-Series USB-A to Lightning Cables
• M102-Series USB-C to Lightning Cables
• U030-Series USB-A to 5-Pin Mini-B Cables
• U038-Series USB-A to USB Type-C
• U326-Series USB-A to Micro-B Cables
• U280-W01-QC3-1 1-Port USB Wall Charger
Operation
Power Bank Charging
Note: The power button is located on the side of the power
bank. When pressed once, the power bank will turn on and the
LEDs will illuminate to indicate how much battery capacity is
left. When pressed twice, the power bank will turn off and stop
any device charging. Before charging any of your devices, you
should first fully charge the power bank.
1. With a user-supplied Lightning cable, connect the female
2. The wireless power bank will begin charging. The LEDs will
21-04-118-933E19-Book.indb 4
21-04-118-933E19-Book.indb 4
Lightning port on the power bank to an USB-A or USB-C port
on your computer or USB wall charger.
indicate the battery capacity level. The table below shows
the LED functionality when charging.
Charging the Power Bank
LED Status
Battery Capacity (%)
Cables
®
= Lit
= Flashing
= Unlit
4
7/27/2021 1:18:34 PM
7/27/2021 1:18:34 PM