Starting Your Portable Air Conditioner - Hisense AP0819CR1W Instrucciones De Uso E Instalación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

NOTE: The symbols may be different from these models, but the functions are similar.
Power On or Off
NOTE:
Keep upright at least 2 hours before use to prevent
damaging the compressor.
At the first time when the air conditioner is plugged in and
turned on after your purchase, it will be set in Cool Mode.
When the air conditioner is turned on at all other times, it
will run according to the previous setting.
Mode
1. Press and release MODE until you see the symbol for the
desired setting.
Operating modes:
2. Choose Cool, Dry, or Fan.
Cooling-Cools the room. Press FAN to select High or Low speeds.
Press the Plus or Minus button to adjust the temperature.

Starting Your Portable Air Conditioner

Dry-Dries the room. The air conditioner automatically
selects t he temperature. The fan runs on Low speed only.
Dehumidification ranges between 2 to 3 pints per hour by
model.
NOTE:
Fan Only mode. Press FAN to select High or Low.
1. Press and release FAN to choose the desired fan speed.
2. Choose High or Low.
High-for maximum fan speed
Low-for minimum fan speed
11
Dry mode should not be used to cool the room.
Fan Speed

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido