Choke Control; Blade Switch; Ignition Switch; Service Meter - Husqvarna Zero Turn Mower / MZ 61 Manual Del Operador

Ocultar thumbs Ver también para Zero Turn Mower / MZ 61:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CONTROLS

Choke Control

The choke control is used for cold starts to
provide the engine with a richer fuel mixture.
For cold starts, pull the control up.

Blade Switch

To engage the mower deck, pull the knob out;
mower blades are disengaged when the knob is
pressed down.

Ignition Switch

The ignition switch is placed on the control panel
and is used to start and stop the engine. On
models equipped with headlights, turn the key
clockwise to ACCESSORY for headlight use.
14

Service Meter

The service meter displays the total number of
hours the engine has run and indicates when the
engine and mower need servicing.
After every 50 hours of operation, an oil can icon
will appear and stay on for two hours, before
an automatic reset occurs. To manually reset
the meter, turn the key off and on five times at
one second intervals. To service the engine and
mower, see the Service Journal of this manual.
Note: The service meter operates (clocks hours)
only when the engine is running. Be sure to turn
the key off when the unit is not in use, to prevent
meter hours from accumulating.

Seat Adjustment Lever

The seat can be adjusted lengthways. The lever
under the front edge of the seat is moved to the
left (as seen by the driver in the seat), to adjust
the seat backward or forward.
IMPORTANT INFORMATION
be adjusted while unit is in motion.
Seat must not

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido