Product Overview R112C5; Seat Safety Switch; Cutting Height Lever; Control For Throttle And Choke - Husqvarna R112C Manual De Usuario

Ocultar thumbs Ver también para R112C:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Product overview R112C5

8
7
9
10
1. Type plate
2. Battery
3. Throttle control/choke control
4. Lever to shift gear
5. Ignition lock
6. Lift lever for the cutting deck
7. Lock button for parking brake
8. Parking brake pedal

9. Cutting height lever

10. Clutch pedal
11. Seat adjustment
12. Fuel tank cap
13. Cover lock

Seat safety switch

The seat safety switch starts the safety circuit when the
operator lifts from the seat. The engine and the drive to
the blades stop if the blades are engaged or the parking
brake is not applied. See also
8 .

Control for throttle and choke

The throttle and choke control adjusts the engine speed
and engages the choke. Move the control forward to
increase the engine speed and rearward to decrease the
engine speed. Move the control to the top to engage the
choke. Use the choke to start the product when the
To start the engine on page 14 .
engine is cold. See

Cutting deck

The product is used with a 2-in-1 cutting deck with
mulch function. The mulch function cuts the grass into
4
6
5
Safety circuit on page
4
3
2
11
12
fertilizer. The 2-in-1 cutting deck can also be used
without the mulch function, for rear discharge of the
grass.
Cutting height lever
The cutting height is adjusted in 5 (1–5) different
positions.
Note: Lift the cutting deck before you adjust the cutting
height.
1
13
1466 - 002 - 28.09.2020

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

R112c5R115c

Tabla de contenido