Features And Controls; Know Your Pressure Washer - Troy-Bilt 020245 Instrucciones De Uso

KNOW YOUR PRESSURE WASHER

Read this owner's manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
Nozzle Extension
with Quick Connect
Primer Bulb
Throttle Lever
Fuel Tank
Accessory Tray — Provides convenient storage for
standard and optional accessories, such as brushes, turbo
wands, etc.
Air Filter — Protects engine by filtering dust and debris
out of intake air.
Automatic Cool Down System — Cycles water
through pump when water reaches 125°-155°F.Warm
water will discharge from pump onto ground.This system
prevents internal pump damage.
Chemical Injection Siphon/Filter — Use to siphon
detergent or other pressure washer chemicals into the low
pressure stream.
Data Tag (not shown, near rear of base plate) –
Provides model and serial number of pressure washer.
Please have these readily available if calling for assistance.
Fuel Tank — Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
High Pressure Hose — Connect one end to water
pump and the other end to spray gun.
Spray Gun
Accessory Tray
Recoil Starter
Air Filter

Features and Controls

High Pressure Outlet — Connection for high pressure
hose.
Nozzle Extension with Quick Connect — Allows you
to switch between four different nozzles.
Oil Fill/Dipstick — Check and fill with oil here.
Primer Bulb — Prepares a cold engine for starting.
Pump — Develops high pressure.
Recoil Starter — Used for starting the engine manually.
Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
ProjectPro™ Nozzles — Detergent, Max, General, and
Delicate nozzles: for various pressure cleaning applications.
Throttle Lever — Sets engine in starting mode for recoil
starter and stops a running engine.
Turbo Nozzle — Rotates a high pressure stream in a
rapid circular pattern.
Water Inlet — Connection for garden hose.
5
Section
2
Turbo Nozzle
ProjectPro™
Nozzles
High Pressure Hose
Oil Fill/Dipstick
High Pressure Outlet
& Water Inlet
Chemical Injection
Siphon/Filter
Pump equipped with
Automatic Cool Down System