Features And Controls; Know Your Pressure Washer - Troy-Bilt 020208 Manual Del Propietário

Ocultar thumbs Ver también para 020208:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

KNOW YOUR PRESSURE WASHER

Read this owner's manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
Accessory Tray
Spray Gun
Water Inlet
Chemical Injection
Siphon/Filter
Accessory Tray — Provides convenient storage for
standard and optional accessories, such as brushes, turbo
wands, etc.
Air Filter — Protects engine by filtering dust and debris out
of intake air.
Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F.Warm water will
discharge from pump onto ground.This system prevents
internal pump damage.
Chemical Injection Siphon/Filter — Use to siphon
detergent or other pressure washer chemicals into the low
pressure stream.
Choke Rod — Prepares a cold engine for starting.
Data Tag — Provides model, revision and serial number of
pressure washer. Please have these readily available if calling
for assistance.
Fuel Tank — Fill tank with regular unleaded fuel. Always leave
room for fuel expansion.
Pump equipped with
Automatic Cool Down System
Data Tag

Features and Controls

High Pressure Outlet
High Pressure Hose (not shown) — Connect one end to
the water pump and the other end to the spray gun.
High Pressure Outlet — To connect high pressure hose.
Nozzle Extension with Quick Connect — Allows you to
switch between four different spray nozzles.
Oil Fill Cap — Fill engine with oil here.
Pump — Develops high pressure.
Recoil Starter — Use for starting the engine manually.
Safety Goggles (not shown) — Always use the enclosed
goggles or other eye protection when running your
pressure washer.
Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes safety latch.
Spray Tips — Chemical injection, 0°, 15°, and 40°: for various
high pressure cleaning applications.
Throttle Lever—Sets engine in starting mode for recoil
starter and stops a running engine.
Water Inlet — Connect garden hose here.
5
Section
2
Air Filter
Throttle Lever
Choke Rod
Recoil Starter
(on front of engine)
Fuel Tank
Nozzle Extension
with Quick
Connect
Spray Tips
Oil Fill Cap

Publicidad

Tabla de contenido
loading

Tabla de contenido