Features And Controls; Pressure Washer - Troy-Bilt 01905 Manual Del Propietário

Features and Controls
2
KNOWYOUR PRESSURE WASHER
Read this owner's manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various
adjustments. Save this manual for future reference.
Spray Gun
Nozzle Extension with
Quick Connect
FuelTank
Spray Tips
controls and
Throttle Lever
Choke Lever
Fuel Valve
Recoil Starter
Rocker Switch
(on front of engine)
-Air Filter
High Pressure Hose
Oil Fill Cap
Chemical Injection
SiphonlFilter
Air Filter -- Protects engine by filtering dust and debris out
of intake air.
Automatic Cool Down System -- Cycles water through
pump when water reaches 125°-155°EWarm water will
discharge from pump onto ground.This system prevents
internal pump damage.
Chemical Injection Siphon/Filter -- Use to siphon
detergent or other pressure washer chemicals into the low
pressure stream.
Choke Lever -- Prepares a cold engine for starting.
DataTag -- Provides model, revision and serial number of
pressure washer. Please have these readily available if calling
for assistance.
Fuel Tank -- Fill tank with regular unleaded fuel.Always leave
room for fuel expansion.
Fuel Valve -- Used to turn fuel on and off to engine.
High Pressure Hose -- Connect one end to the water
pump and the other end to the spray gun.
Pump equipped
with Automatic
Cool Down
System
Data Tag
Water Inlet High Pressure Outlet
High Pressure Outlet --To connect high pressure hose.
Nozzle Extension with Quick Connect --Allows you to
switch between five different spray tips.
Oil Fill Cap -- Fillengine with oil here.
Pump -- Develops high pressure.
Recoil Starter -- Use for starting the engine manually.
Rocker Switch -- Set this switch to "On" before using
recoil starter. Set switch to "Off' to switch off engine.
Safety Goggles (not shown) --Always use the enclosed
goggles or other eye protection when running your
pressure washer.
Spray Gun -- Controls the application of water onto
cleaning surface with
trigger
device. Includes safety latch.
Spray Tips -- Chemical injection, 0°, 15°, 25 °, and 40°: for
various high pressure cleaning applications.
Throttle Lever--Sets engine in starting mode for recoil
starter.
Water Inlet -- Connect garden hose here.