Features And Controls; Pressure Washer - Troy-Bilt 020245 Instrucciones De Uso

Features and Controls
2
KNOWYOUR PRESSURE WASHER
Read this owner's manual and safety rules before operating your pressure washer,
Compare the ilhstrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
Spray Gun
AccessoryTray
Turbo Nozzle
Nozzle Extension Recoil Starter
with Quick
Air Filter
Primer Bulb
Fuel Tank
ProjectPro TM
Nozzles
High Pressure Hose
_i psti ck
High Pressure Outlet
& VVater Inlet
Chemical Mjection
"_'_'--_ Pump equipped with
Automatic Cool Down System
Accessory Tray -- Provides convenient storage for
standard and optional accessories,such as brushes,turbo
wands,etc.
Air Filter -- Protects engine by filtering dust and debris
out of intake air.
Automatic Cool Down System -- Cycles water
through pump when water reaches 125°. 155°E Warm
water will discharge from pump onto ground.This system
prevents internal pump damage.
Chemical Injection Siphon/Filter -- Use to siphon
detergent or other pressure washer chemicals into the low
pressure stream.
[)ataTag (not shown, near rear of base plate) -
Provides model and serial number of pressure washer.
Please have these readily available if calling for assistance.
Fuel Tank -- Fill tank with regular unleaded fuel.Always
leave room for fuel expansion.
High Pressure Hose -- Connect one end to water
pump and the other end to spray gun.
High Pressure Oudet -- Connection for high pressure
hose.
Nozzle Extension with Quick Connect --Allows you
to switch between four different nozzles.
Oil Fill/Dipstick -- Check and fill with oil here.
Primer Bulb -- Prepares a cold engine for starting.
Pump -- Develops high pressure.
Recoil Starter -- Used for starting the engine manually.
Spray Gun -- Controls the application of water onto
cleaning surface with trigger device. Includes trigger loci<.
ProjectPro TMNozzles -- Chemical injection, 0 °, IS°, and
40°: for various high pressure cleaning applications.
Throttle Lever -- Sets engine in starting mode for recoil
starter and stops a running engine.
Turbo Nozzle -- Rotates a high pressure stream in a
rapid circular pattern.
Water Inlet -- Connection for garden hose.