Panasonic VIERA TC-L42E5H Instrucciones De Operación página 8

Assembly screw (4)
M5 × 15
Assembly screw (4)
M4 × 25
1
Assembling the pedestal
Use the assembly screws
the base securely.
●
Make sure that the screws are securely tightened.
●
Forcing the assembly screws the wrong way will strip
the threads.
Front
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws
2 Pull out the pedestal from the TV.
3 Remove the assembly screw
Preventing the TV from falling over
Using the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the installation
surface.
●
The place where the pedestal is to be fixed should be thick enough and made of hard material.
8
Bracket
●
to fasten the bracket
A
Hold the bracket not
to fall over
C
D
from the TV.
from the bracket.
TBL5ZA32821
2
Securing the TV
to Use the assembly screws
● Tighten the four assembly screws loosely at first, then
tighten them firmly to fix securely.
●
Carry out the work on a horizontal and level surface.
Hole for pedestal
installation
Screw (not supplied)
Diameter: 3 mm
Length: 25 - 30 mm
Screw hole
Base
●
TBL5ZX0268
to fasten securely.
Arrow mark
B