Standard Accessories; Optional Accessories; Battery Removal/Installation - Hitachi WH 14DDL Instrucciones De Manejo

English
SPECIFICATIONS
POWER TOOL
Model
Voltage
High mode
No-load Medium mode
speed
Low mode
S mode
Ordinary bolt
High tension bolt
Capacity
Machine screw
Self drilling screw
Tightening torque (Maximum)
Rechargeable battery
Weight
CHARGER
Model
Charging voltage
Weight

STANDARD ACCESSORIES

In addition to the main unit (1), the package contains the
accessories listed in the table below.
1 Charger ............................................. 1
2 Battery ............................................... 2
WH14DDL
WH18DDL 3 Plastic case ....................................... 1
4 Battery cover .................................... 1
Standard accessories are subject to change without
notice.

OPTIONAL ACCESSORIES

(Sold separately)
Battery
(BSL1430, BSL1440)
Optional accessories are subject to change without notice.
10
WH14DDL
14.4 V
0 – 3000 min
0 – 2200 min
0 – 900 min
0 – 3000 min
167 N·m
BSL1430: Li-ion
14.4 V (3.0 Ah 8 cells) 14.4 V (4.0 Ah 8 cells) 18 V (3.0 Ah 10 cells) 18 V (4.0 Ah 10 cells)
1.3 kg
UC18YRSL
14.4 V – 18 V
0.6 kg
(BSL1830, BSL1840)
–1
–1
–1
–1
M5 – M16
M5 – M12
M4 – M8
ø 3.5 – ø 6
BSL1440: Li-ion BSL1830: Li-ion
APPLICATION
Driving and removing of machine screws, wood
screws, tapping screws, self drilling screws, etc

BATTERY REMOVAL/INSTALLATION

1. Battery removal
Hold the handle tightly and push the battery latch to
remove the battery (see Fig. 2).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 2).
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to a receptacle.
When the power cord is connected, the charger's
pilot lamp will blink in red. (At 1-second intervals)
2. Insert the battery into the charger.
Firmly insert the battery into the charger until the line
is visible, as shown in Fig. 3, 4 .
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light continuously
in red.
When the battery becomes fully recharged, the pilot
lamp will blink in red. (At 1-second intervals) (See
Table 1)
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or
the rechargeable battery.
WH18DDL
18 V
–1
0 – 3100 min
0 – 2200 min –1
–1
0 – 900 min
–1
0 – 3100 min
172 N·m
BSL1840: Li-ion
1.5 kg