RIDGID RT1400M0 Manual Del Usuario página 25

ASSEMBLY
Hose Storage Clip Assembly
1. Locate the two (2) Hose Clips and
four (4) #10 x 19 mm (3/4") Pan Head
Screws.
2. Place a Clip into the recess next to one
of the Latches. The Curve of the Clip
should face outward.
3. Insert a #10 x 19 mm (3/4" ) Pan Head
Screw into each mounting hole and
tighten securely.
4. Repeat on the other side.
#10 x 19 mm (3/4")
Pan Head Screws (2)
Hose
Clips
(1 on each
side)
Powerhead
Assembly
SP7081 1400M0 01/19.indd 25
Inserting/Removing the
Professional Locking Hose
1. Locate the end of the Professional
Locking Hose and align it with the Drum
Inlet. Position the Hose Release Button
with the Ridges on the Vac Inlet. Push the
Hose end straight into the Vac Inlet until
the Hose Release Button fully engages
the Inlet Ridges.
Hose Release Button
Professional
Locking Hose
Hose Release
Button
25
Drum
Inlet
Ridges
INSERT
HOSE
Inlet
Ridges
1/31/19 4:42 PM