ION Total PA Plus Guia De Inicio Rapido página 5

16. Master Volume: Turn this knob to adjust the overall output volume of the loudspeaker.
17. Power Cable Input (IEC): Insert the included power cable here to power the unit.
18. Fuse: The orientation of the fuse holder determines the current voltage setting
of Total PA Plus. The current setting is shown above the white triangle ():
110–120 V or 220–240 V. If you use Total PA Plus in a region with a different
voltage, change the voltage setting by removing the fuse holder, inverting it,
and reinserting it.
If the unit's fuse is broken, remove the fuse holder and replace the broken fuse
with one with the same rating (printed on the fuse holder). Using a fuse with an
incorrect rating can damage the unit and/or fuse.
19. Power Switch: Turns Total PA Plus on or off.
Media Panel
Media Panel Functions:
MODE Mode: Switches modes from Bluetooth, FM radio, SD, USB, and Aux.
Play/Pause: Play/pause the USB, SD, or Bluetooth source. Press and hold Play/Pause for 2
seconds to begin the preset auto-store function. This jumps to the lowest station (87.5) and
then travels through the bandwidth to auto-store the strongest stations as presets.
Repeat: Repeat all of the tracks (ALL), repeat all of the tracks in the folder (FoLd), repeat the
current playing USB or SD track (ONE), or shuffle the track order (rAn).
Previous: Navigates through USB and SD tracks. Plays the previous USB, SD, or Bluetooth
track, or tunes the radio down one preset when pressed once. Hold the button down to seek
back through radio stations.
Next: Plays the next USB, SD, or Bluetooth track, or tunes the radio up one preset when
pressed once. Hold the button down to seek forward through radio stations.
Note: In some apps, pressing the Previous ( ) or Next ( ) buttons may go to another playlist or
music genre.
5