Twin-Star International ClassicFlame 34HF600GRA Manual De Instrucciones página 8

2. Choose a wall location to attach the mounting
bracket (A). Position the mounting bracket (A)
in the desired location. Use a level to align the
bracket and mark the four holes with a pencil
(Fig. 2).
3. Drill 4 holes (∮5/16 in) in the wall. Insert
the wall anchors (BB) into the holes using a
hammer. (Fig. 3)
Hardware Used
Wall Plug
BB
0.3 in. x 1.5 in.
4. Attach the mounting bracket (A) to the wall
fastening the 4 screws (AA) into the wall
anchors (Fig. 4).
Hardware Used
Screw
AA
0.2 in. x 1.5 in.
5. Hang the fireplace (B) on the hooks at bottom
and push the fireplace (B) into mounting
bracket (A). Re-fasten the two screws
removed in Step 1.(Fig. 5)
Hardware Used
Screw
0.2 in. x 0.31 in.
Fig. 2
Fig. 3
x 4
Fig. 4
x 4
Fig. 5
x 2
7
BB
AA
A
B