3
4
2
7. Driver installation on PC
1. Insert the installation CD on the CD ROM unit of your computer and the starter screen will appear. If it doesn´t appear,
double click over the CD/DVD ROM unit and run the file
"autorun.exe".
2. Select the option "Driver SNT1022" to start the insta-
llation.
3. Please read carefully the License Terms. If you agree,
accept them and click on "Next" to continue.
4. Click on "Install driver and Ralink WLAN utility" if you
want to install the device drivers and the network soft-
ware. Select "Install driver only" if you only want to install
the device drivers and to use Windows menus to setup
the network.
Then click on "Next" to continue.
5. If you selected "Install driver and Ralink WLAN utility"
in the previous menu, you will be able to choose the soft-
ware for wireless network connection: "Ralink Configura-
tion Tool" or "Microsoft Zero Configuration Tool". Select
one of them and click on "Next" to continue.
1
5
SNT1022 User Manual
Index
1. Welcome
2. Features
3. System requirements
4. Technical specifications
5. Content
6. Hardware
7. Driver installation on PC
8. Device connection
8.1 RaUI setup
9. Network connection
9.1 Network connection using WZC
9.2 Network connection using RaUI utility
9.3 Network connection in AP-Mode (Ad Hoc)
9.4 Network connection in 5Ghz frequency
10. RaUI software control panel
10.1 Network
10.2 Profile
10.3 Advance
10.4 Statistics
10.5 WMM
10.6 SSO
10.7 CCX
10.8 Radio On/Off
10.9 About
11. MAC address specifications
Important information
23
English