- This is the result:
WMM Power save enable
- Active WMM-Power Save Enable
- Select the category you want to enable (AC_BKm, AC_BE, AC_VI, AC_VO)
Direct Link Setup Enable
- Active Direct Link Setup Enable
- Enter the Mac address of the other client in the Direct Link fields.
- Click on "Apply"
Note: The other client must be connected to the same modem or router which supports DLS function.
10.6 SSO
This section allows you to setup the profile start in the OS start process.
SNT1022 User Manual
Index
1. Welcome
2. Features
3. System requirements
4. Technical specifications
5. Content
6. Hardware
7. Driver installation on PC
8. Device connection
8.1 RaUI setup
9. Network connection
9.1 Network connection using WZC
9.2 Network connection using RaUI utility
9.3 Network connection in AP-Mode (Ad Hoc)
9.4 Network connection in 5Ghz frequency
10. RaUI software control panel
10.1 Network
10.2 Profile
10.3 Advance
10.4 Statistics
10.5 WMM
10.6 SSO
10.7 CCX
10.8 Radio On/Off
10.9 About
11. MAC address specifications
Important information
37
English