Sveon SNT1022 Manual De Usuario página 27

Adaptador usb inalambrico 11n de doble banda 2,4/5ghz
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

- A window will appear to enter the network password:
If the connection is properly done, appears the following window: under WZC connection the network appears as "Con-
nected"; under RaUI application, the network is pointed with a blue arrow icon.
9.2 Network connection using RaUI utility
When the RaUI utility is enabled, the system is connected automatically through the wireless network with the best cove-
rage. If there is a setup profile, the system is connected to this profile.
The network list includes the most used fields: SSID, channel, kind of network, security and signal percent. The blue
arrow icon indicates the enabled network.
1. Go to "Ralink Wireless Utility" menu or press this icon in the Windows Bar.
2. The available network list is shown.
3. Select the network which you want to connect in the field "SSID (network name)" and press "Connect". Enter the net-
work password of Router or modem in the field "Preshared key" or "Wep Key" depending on the encryptation.
4. Press "Ok".
SNT1022 User Manual
Index
1. Welcome
2. Features
3. System requirements
4. Technical specifications
5. Content
6. Hardware
7. Driver installation on PC
8. Device connection
8.1 RaUI setup
9. Network connection
9.1 Network connection using WZC
9.2 Network connection using RaUI utility
9.3 Network connection in AP-Mode (Ad Hoc)
9.4 Network connection in 5Ghz frequency
10. RaUI software control panel
10.1 Network
10.2 Profile
10.3 Advance
10.4 Statistics
10.5 WMM
10.6 SSO
10.7 CCX
10.8 Radio On/Off
10.9 About
11. MAC address specifications
Important information
27
English

Publicidad

Tabla de contenido
loading

Tabla de contenido