Sveon SNT1022 Manual De Usuario página 34

Add profiles from Network menu
Please follow these steps to add new profiles from "Network" menu:
1. Press over the network you
want to connect and then select
"Add profile".
2. Select the profile name.
3. Click over the option "Auth.\ Ecry."
4. Enter the network password and press "Ok".
5. To active the profile select it and press "Acti-
vate".
6. If the profile activation has been finished su-
cessfully, the following window will appear:
Note: The information provided by your modem
or router may be different depending on the setup
and the model.
SNT1022 User Manual
Index
1. Welcome
2. Features
3. System requirements
4. Technical specifications
5. Content
6. Hardware
7. Driver installation on PC
8. Device connection
8.1 RaUI setup
9. Network connection
9.1 Network connection using WZC
9.2 Network connection using RaUI utility
9.3 Network connection in AP-Mode (Ad Hoc)
9.4 Network connection in 5Ghz frequency
10. RaUI software control panel
10.1 Network
10.2 Profile
10.3 Advance
10.4 Statistics
10.5 WMM
10.6 SSO
10.7 CCX
10.8 Radio On/Off
10.9 About
11. MAC address specifications
Important information
34
English