Installation
Instructions
If you have any questions, call 800.GE.CARES (800.432.2737)
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT –
•
for local inspector's use.
IMPORTANT –
•
codes and ordinances.
Note to Installer –
•
instructions with the Consumer.
Note to Consumer –
•
for future reference.
• Skill level – Installation of this appliance requires
basic mechanical and electrical skills.
• Completion time – 1-3 hours
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not
covered under the Warranty.
FOR YOUR SAFETY:
WARNING
• This appliance must be properly grounded and
installed as described in these Installation Instructions.
• Do not install or store the appliance in an area where
it will be exposed to water/weather. See the Location
of Your Washer section.
• NOTE: This appliance must be properly
grounded, and electrical service to the washer
must conform with local codes and ordinances
and the latest edition of the National Electrical
Code, ANSI/NFPA 70.
Save these instructions
Observe all governing
Be sure to leave these
Keep these instructions
or visit our Website at:
TOOLS REQUIRED FOR
WASHER INSTALLATION
o 1/4" nut driver
o 3/8" socket with ratchet
o 3/8" open-end wrench
o Adjustable wrench or 7/16" socket with ratchet
o Adjustable wrench or 9/16" open-end wrench
o Channel-lock adjustable pliers
o Carpenter's level
PARTS SUPPLIED
o Water Hoses (2)
STACK BRACKET KIT
A stack bracket kit is available at additional cost.
It can be ordered in the United States by visiting
our website at GEAppliances.com or calling 800.
GE.CARES. Order kit #WE25X10018 or GEFLSTACK.
14
Washer
GEAppliances.com
o Cable Tie
o Hose Guide