Minimum Distances; Wall Mounting - Fakir HL 30 Instrucciones De Uso

Do not mount within the depicted
areas !
A
B
c
a
C
10

Minimum distances ...

Wall mounting

If you want to mount the fan heater on the wall
• Select a spot near a socket, but not directly underneath it,
and ensure the minimum distances from the wall and from
the ceiling and/or floor.
• To fit the wall holder, hold it against the wall at the inten-
ded spot like drawing A, and mark the positions of the
fastening holes with a sharp pencil.
• Ensure that the holder is horizontal and that the holes are
clear of electric cables and pipes.
• Drill the holes at the marked points and insert plastic
pougs. Then screw the wall holder in tight.
• Insert the two distance holders (a) according sketch B on
a
the left and right side of the rear and push the base sup-
b
port (b) after pressing the locking device (c) until it stops.
• Slide the fan heater (while holding it vertical) into the wall
holder by its rear face and fix it with the screw according
sketch C.
Caution: When fitting the base as the wall holder, ensure
that no curtains, towels or other inflammable objects can
be hung in front of the fan heater later on. This could
cause overheating.
... to neighbouring objects, walls and
ceilings
30 cm
30 cm
30 cm
30 cm