Specifications - Hitachi WH 18DSDL Manual De Instrucciones

English
2. Battery Charger (UC18YRSL)
Pilot lamp

SPECIFICATIONS

1. Cordless Impact Driver/Wrench
Model
Power mode
No-load speed
Save mode
Small screw
Capacity Ordinary bolt
High tension bolt
Tightening torque
(Maximum)
Bit shank size
Rechargeable battery
Weight
2. Battery Charger (UC 18YRSL)
Input power source
Charging time
Charging voltage
Charger
Charging current
Weight
NOTE: The charging time may vary according to temperature and power source voltage.
10
01Eng_WH18DSDL_US.p65
Cord
Fig. 2
WH18DSDL
5/32" – 3/8" (M4 – M10)
1/4" – 9/16" (M6 – M14)
1/4" – 15/32" (M6 – M12)
Power mode 1,510 in-lbs.
{170 N·m}
Save mode 840 in-lbs.
{95 N·m}
Tightening is 9/16" (M14) high
tension bolt, when fully charged
at 68°F (20°C) temp.
Tightening time: 3 sec.
1/4" (6.35 mm) Hex.
BSL1830: Li-ion 18 V (3.0 Ah)
Single phase: AC 120 V 60 Hz
10
Guide rail
Nameplate
WR18DSDL
0 – 2,600/min
0 – 2,000/min
3/8" – 23/32" (M10 – M18)
5/16" – 9/16" (M8 – M14)
Power mode 188 ft·lbs.
Save mode 103 ft·lbs.
Tightening is 5/8" (M16) F10T,
when fully charged at 68°F
(20°C) temp.
Tightening time: 5 sec.
1/2" (12.7 mm) square
3.7 lbs. (1.7 kg)
Approx. 45 min.
DC 14.4 V – 18 V
DC 14.4 V: DC 3.5 A
DC 18 V: DC 3.5 A
1.3 lbs. (0.6 kg)
11/19/12, 1:19 PM
{255 N·m}
{140 N·m}