Specifications - Hitachi WH 18DBDL Manual De Instrucciones

English
2. Battery Charger
Cord
Pilot lamp

SPECIFICATIONS

1. Cordless Impact Driver/Wrench
Model
No-load speed
Small screw
Capacity Ordinary bolt
High tension bolt
Tightening
torque
Bit shank size
Rechargeable battery
Weight
2. Battery Charger
Model
Input power source
Charging time
Charging voltage
Charger
Charging current
Weight
NOTE: The charging time may vary according to temperature and power source voltage.
10
Nameplate
<UC18YRSL>
WH18DBDL
5/32" (M4) – 3/8" (M10)
3/16" (M5) – 9/16" (M14)
3/16" (M5) – 15/32" (M12)
Maximum 1,420 in-lbs {160 N·m 1,630 kgf·cm} Maximum 2,210 in-lbs {250 N·m 2,550 kgf·cm}
Tightening is 9/16" (M14) high tension bolt,
when fully charged at 68°F (20°C) temp.
Tightening time: 3 sec.
1/4" (6.35 mm) Hex.
Pilot lamp
Guide rail
Nameplate
Fig. 2
High mode 0 – 2,600 /min
Medium mode 0 – 2,000 /min
Low 2 mode 0 – 1,400 /min
Low 1 mode 0 – 900 /min
BSL1830: Li-ion 18 V (3.0 Ah)
3.7 lbs. (1.7 kg)
UC18YRSL
Single phase: AC 120 V 60 Hz
Approx. 45 min.
DC 14.4 V – 18 V
DC 14.4 V: DC 3.5 A
DC 18 V: DC 3.5 A
1.3 lbs. (0.6 kg)
Cord
<UC18YFSL>
WR18DBDL
–––
3/8" (M10) – 23/32" (M18)
5/16" (M8) – 9/16" (M14)
Tightening is 5/8 (M16) F10T,
when fully charged at 68°F (20°C) temp.
Tightening time: 3 sec.
1/2" (12.7 mm) Square
UC18YFSL
1.1 lbs. (0.5 kg)
Guide rail