Electrical Connection - Fox F28-191A Manual De Instrucciones

ELECTRICAL CONNECTIONS
Use 230 V 50 Hz alternate voltage equipped with a earthing conductor to supply your machine. Ensure that the
power supply corresponds to this voltage, that it is protected by a differential and magnetothermal switch, and that
the earthing system is efficient. If your machine does not work when connected to a socket, check carefully the
power supply features.
Use an extension cable in order to connect the machine to the power supply.
If the tool does not work properly or in case of short-circuit, the earthing system provides the current with a less
resistance path and reduces the risk of electric shock. This tool has a plug to which a supply or extension cable
must be connected, which in turn must be connected to a socket correctly installed and earthed, in conformity with
local standards and regulations. Be sure that your earthing system is in good conditions and that your plug is
protected by a differential and magnetothermal switch.
Do not modify the plug of the machine. If it does not enter the socket, get a suitable plug installed by a qualified
person. If the earthing conductor is not correctly connected the risk of electric shock can occur. The conductor
which has the green insulating jacket (with or without a yellow line) is the earthing conductor. If you must repair or
change the supply cable, do not connect the earthing conductor to a low tension terminal.
Consult a qualified electrician or a person in charge of the maintenance if you have not understood or you have
some doubts on the earthing instructions.
If the supply cable is damaged it must be changed by qualified people. Do not switch on the machine if the supply
cable is damaged.
This tool is provided with a plug which must connected to a suitable socket.

ELECTRICAL CONNECTION

EARTHING INSTRUCTIONS
Socket with earthing
system
Earth conductor
EN
Machine's plug
24