Replacing The Steering Potentiometer - NAMCO MOTOCROSS GO! Deluxe Manual Del Operador

8-6 Replacing the Steering Potentiometer

1. Remove 5off Security screw (M5x10) and remove the Steering Cover
Vac-Form.
2. Disconnect the connector
3. Loosen the grub screw (M4x10) and remove the potentiometer complete
with bracket.
4. Replace the potentiometer taking care to connect the correct colour wire
to the correct terminal.
When replacing the potentiometer ensure that the locating tab engages in
the hole in the pot bracket and that the grub screw engages on the flat of
the potentiometer shaft.
Page 63