Insert the Heat Pad (if using)
1. Stand up the bag and insert the
heat pad into the pocket.
Assemble the Bag
1. Stand up the bag.
5. Redo the velcro over the
bottom flap.
Install the Straps (optional)
1. Clip the straps to the bag as
shown.
Food Delivery Backpack Bag
2. Thread the cable through the
hole at the back of the pocket.
2. Locate the included corner
connectors.
6. Install the corner connectors on
the rear side of the bag.
Assembly Instructions
Item No. VDBBM300, VDBBM500, VDBBM5P00
3. Thread the cable through the port
located at the rear of the bag.
3. Undo the velcro to expose the
bottom frame rail.
7. Zip the rear door closed.
©
2018 The Vollrath Company L.L.C.
4. The cable will exit near the
pouch on the outside of the bag.
4. Install the corner connectors on
the front side of the bag.
Part No. 351719-1 ml
12/7/18