Bosch GOP18V-28 Instrucciones De Funcionamiento Y Seguridad página 11

2610042946 10-16 GOP18V-28.qxp_GOP18V-28 10/27/16 1:30 PM Page 11
VARIABLE SPEED DIAL
This tool is equipped with a variable speed
dial. The speed may be controlled during
operation by presetting the dial in any one of
six positions (Fig. 1).
OPERATING SPEEDS
The Bosch oscillating tools have a high
oscillating motion of 8,000 - 20,000 /min
(OPM). The high speed motion allows the
Bosch tools to achieve with excellent results.
The oscillating motion allows the dust to fall
to the surface rather than slinging particles
into the air.
To achieve the best results when working
with different materials, set the variable
speed control to suit the job (see Speed
Range chart at right for guidance). To select
the right speed for the accessory in use,
practice with scrap material first.
Slide charged battery pack into the housing
until the battery pack locks into position.
Your tool is equipped with a secondary locking
latch to prevent the battery pack from
completely falling out of the handle, should it
become loose due to vibration.
The GOP18V-28 is compatible with StarLock family of accessories as indicated in the
following chart
Accessory
injury and property damage.
INSERTING AND RELEASING BATTERY PACK
Accessories
Accessory Model Number Range
Only use Bosch accessories rated 21000 OPM or greater. Using
accessories not designed for this power tool may result in serious personal
The variable speed control settings are
marked on the speed control dial. The
settings for approximate /min (OPM) are:
Speed Dial
Setting
1
2
3
4
5
6
To remove the battery pack, press the battery
pack release button and slide the battery pack
forward (Fig. 1).
Press the battery pack release button again
and slide the battery pack completely out of
tool housing.
OSL
OSP
OSM
-11-
Speed Range
/min (OPM)
8,000
10,400
12,800
15,200
17,600
20,000
GOP18V-28
YES
YES
NO