en-us Alarm
Switch on or off the connection to the
home WLAN network (Wi-Fi)
Open the WiFi menu on your refrigerator.
1.
~ "Open Home Network menu" on page 14
The first time you open the menu, you will be
Note:
automatically guided through initial setup. Follow the
instructions on the control panel.
To open the menu item, press
2.
Connection : button.
Use ( ) buttons to select the required setting.
3.
To select the setting, press 8 button.
4.
Note: If you switch off the Home Connect
connection, you will no longer be able to operate the
appliance with your mobile device.
Information on data protection
The first time your Home Connect appliance is
registered on a WLAN home network connected to
the Internet (Wi-Fi), your appliance will transmit the
following types of data to the Home Connect server
(initial registration):
Unique appliance identification (consisting of
■
appliance codes as well as the MAC address of
the installed Wi-Fi communication module).
Security certificate of the Wi-Fi communication
■
module (to ensure a secure data connection).
The current software and hardware version of
■
your domestic appliance.
Status of any previous resetting to factory
■
settings.
This initial registration prepares the
Home Connect functions for use and is only required
when you want to use these
Home Connect functions for the first time.
Note: Please note that the Home Connect functions
can be utilized only in conjunction with the
Home Connect app. Information on data protection
can be called up in the Home Connect app.
16
MAlarm
D oor alarm
A l a r m
If the appliance door is open for a long time, the
door alarm (continuous audible signal) switches on.
Close door.
■
The audible warning signal is switched off.