Changing The Batteries; Technical Data - GUTMANN Campo II 05 EM Instrucciones De Uso

en
Automatic follow-up time
The automatic follow-up time is activated by
pressing the field with the Follow-up time
symbol (2 symbol from the left). The follow-
nd
up time symbol lights up. The extractor hood
switches from level 3 back top level 1 and
runs at this level ~15 minutes before switching
off.

Changing the batteries:

The battery cover is situated on the back of
the remote control. Lift the cover with thumb
and first finger until the magnetic contact that
holds the battery cover releases. Now remove
the empty batteries and replace them with
new batteries of the same type.
Caution: Do not dispose of empty batteries
with your normal household waste!

Technical data

Dimensions: 230 x 34 x 10
Battery: 2 lithium batteries
Type: CR 2032 3 V
Infrared range: ~ 2m