Technical Data - Worx MakerX Manual Del Usuario

COMPONENT LISTS
1. SPINDLE LOCK BUTTON
2. WHEEL GUARD
3. WHEEL
4. FLANGE
5. SCREW
6. HEX KEY (M4)
7. 1/4" (6.4 MM) BUTTERFLY-TYPE BLADE ARBOR ADAPTER
*Not all the accessories illustrated or described are included in standard
delivery.

TECHNICAL DATA

Rated Voltage
Motor type
No load speed
Blade size
Blade bore
Spindle thread
Machine weight (bare tool)
** X may be followed by one or two characters. All models are the same except
model number and trademark. The suffix in models may be number from "1" to
"99" or English letter "A" to "Z" or "M1" to" M9" which means different package or
the various of accessories packed in the package.
***Voltage measured without workload. Initial battery voltage reaches maximum
of 20 volts. Nominal voltage is 18 volts.
Category
20V Hub/HubX
Only use the appropriate accessories intended for this tool. Accessory information can
be found on the product packaging, at a Worx dealer or on our website at www.worx.com.
MakerX series tools and 20V Hub/HubX are specially designed to work together, so do
not attempt to use any other devices.
3/8'' (9.5 mm) (only for 2'' balde)
1/4"(6.4 mm) Butterfly-type with adapter (only for 1 1/2'' blade)
Model
WA7150
WA7151
WX741L WX741L.X**
20 V Max***
Brushless
5000-24000 rpm
2'' (50 mm)
1 1/2'' ( 38mm)
M4
0.29 lbs (130 g)
Capacity
Input: 20 V
Output: 20 V
Input: 20 V
Output 1: 20 V
Output 2: 5 V
EN
11
10 A Max.
10 A Max.
10 A Max.
10 A Max.
2 A (USB port)