Technical Data; Noise Information; Vibration Information - Worx WX800. Serie Manual Original

9. INNER FLANGE
10. OUTER FLANGE
11. CLAMP ADJUSTMENT NUT
12. SPINDLE
13. GUARD CLAMPING LEVER
14. WHEEL GUARD FOR CUTTING*
*Not all the accessories illustrated or described are
included in standard delivery.

TECHNICAL DATA

Type WX800 WX800.X (800—819 -designation of
machinery, representative of Angle Grinder)
Rated voltage
No load speed
Disc size
Disc bore
Spindle thread
Machine weight (Bare tool)
10
**Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage
is 18 volts.
***X=1-999, A-Z, M1-M9 there are only used for different
customers, there are no safe relevant changes between
these models

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K &K
pA wA
Wear ear protection.

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined
according to EN 60745:
Lithium-Ion cordless angle grinder
WX800 WX800.X***
20V Max**
8600/min
115mm
22mm
M14
1.54kg
L : 86.8dB(A)
pA
L : 97.8dB(A)
wA
3 dB(A)
Surface
Vibration emission value
grinding a = 4,300m/s
h,AG
or abrasive
Uncertainty K = 1.5m/s2
cutting off
The declared vibration total value may be used for
comparing one tool with another, and may also be used in
a preliminary assessment of exposure.
WARNING: The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which the tool is
used dependant on the following examples and other
variations on how the tool is used:
How the tool is used and the materials being cut.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it
is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design and
these instructions.
This tool may cause hand-arm vibration syndrome if
its use is not adequately managed.
WARNING! To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating cycle
such as the times when the tool is switched off and when
it is running idle but not actually doing the job. This may
significantly reduce the exposure level over the total
working period.
Help to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions
and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti
vibration accessories.
Plan your work schedule to spread any high vibration tool
use across a number of days.
Category Type
20V Battery WA3550
WA3550.1
WA3551
WA3551.1
WA3553
20V Charger WA3760
WA3869
WA3880
We recommend that you purchase your accessories
2
Capacity
1.5Ah
1.5Ah
2.0Ah
2.0Ah
4.0Ah
0.4A
2.0A
2.0A
EN