GE AKL05 Manual Del Propietario E Instrucciones De Instalación página 13

4
Remove the Shipping Pad
Remove and discard the shipping pad next to the compressor.
5
Install the Mounting Rails onto the Case
Remove the backing from the top mounting
A
rail seal strip and attach it to the bottom of
the top mounting rail.
Remove and discard
shipping pad
Attach the top mounting rail onto the top
B
of the case with 5 Type A screws.
Attach the bottom mounting rail to the
C
bottom of the case from the inside, using
2 Type A screws in the back holes of the
bottom rail sides.
Type A screws
Type A screw
Type A
screws
Type A screws
13