Window installation instructions.
6
Install the Side Accordion Panels
Insert the notch on the wider side of one
A
shutter into the groove on the left front side of
the case.
Shutter
Slide the shutter all the way down into the
groove.
7
Prepare the Window
Cut the window sash seal to the window width and
stick the adhesive side to the bottom of the sash.
14
Notch
Window sash seal
Slide the left accordion panel into the top and
B
bottom mounting rails.
Pull the shutter all the way out until the
C
notch on the outside edge of the shutter is
visible through the hole in the top corner
of the frame.
Insert the notch on the shutter into the groove
on the locking bar and slide the bar all the way
down to secure the shutter.
Notch
Locking bar
Repeat steps A–C for the right side accordion
D
panel.