GE AKL05 Manual Del Propietario E Instrucciones De Instalación página 17

10
Install the Air Conditioner in the Case
Slide the air conditioner into the case. Do not
A
push on the controls or the finned coils.
Make sure the air conditioner is firmly seated.
Replace the two screws removed earlier, one
B
on each side of the case.
IMPORTANT! Reconnect the ground wire to the
C
left side of the face of the unit.
Ground wire
D
E
F
Screw
Attach the front grille frame to the case by
inserting the tabs on the grille frame into
the slots on the front top of the case. Push
the grille frame in until it snaps into place
around the power cord on the right side.
Guide the levers carefully
through the grille frame
as you push it in.
Secure the front grille frame to the case by
replacing the screws removed earlier.
Install the filter. Hook the inlet grille in the
frame and close it. Connect power.
17