Safety
Operating the unit and performing service work on the unit
The operator must ensure that personnel appointed to perform service
and repair work as well as leak inspections are certified to deal with
refrigerant and filling systems.
Certification and knowledge of the applicable guidelines and standards
can be acquired from a training course at a chamber of trade, chamber of
industry and commerce or at any other recognized training facility.
The system operator must ensure that all service hoses are laid in such
a way that they cannot be damaged when the unit is used.
2.5
Warnings on the AirCon Service Center
Warning!
Observe the operating manual!
Only connect the device to a 230 V / 50 Hz AC socket!
Protect the device against rain!
Wear gloves when handling refrigerants!
Wear goggles when handling refrigerants!
2.6
Safety devices
Pressure monitor: switches the compressor off if the normal operating
pressure is exceeded.
Pressure relief valves: additional safety mechanism to protect lines or
vessels from bursting if the pressure continues to rise despite the
safety pressure monitor.
80
ASC 2500 G LE / ASC 3500 G LE
EN