Makita XSL08 Manual De Instrucciones página 2

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Blade diameter
Hole diameter
Max. kerf thickness of the saw blade
Max. miter angle
Max. bevel angle
No load speed (RPM)
Laser type
Rated voltage
Dimensions (L x W x H)
Net weight
Cutting capacities (H x W)
0°
Thickness of wood
facing on guide
fence for increased
45° (right and left)
Thickness of wood
facing on guide
fence for increased
60° (right and left)
Thickness of wood
facing on guide
fence for increased
Cutting capacities for special cuttings
Type of cutting
Crown molding 45° type
(with crown molding stopper used)
Base board
(with horizontal vise used)
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Miter angle
-
20 mm (13/16")
38 mm (1-1/2")
height of cut
-
15 mm (9/16")
25 mm (1")
height of cut
-
15 mm (9/16")
25 mm (1")
height of cut
XSL08
Wavelength 655 nm, Maximum output
898 mm x 690 mm x 725 mm
(35-1/4" x 27-1/4" x 28-1/2")
45° (left)
61 mm x 382 mm
(2-3/8" x 15")
71 mm x 363 mm
(2-13/16" x 14-1/4")
78 mm × 325 mm
(3-1/16" × 12-3/4")
80 mm × 292 mm
(3-1/8" × 11-1/2")
61 mm x 268 mm
(2-3/8" x 10-1/2")
71 mm x 255 mm
(2-13/16" x 10")
-
-
2 ENGLISH
XSL07
305 mm (12")
25.4 mm (1")
3.2 mm (1/8")
Right 60°, Left 60°
Right 48°, Left 48°
4,400 /min
1mW (Laser Class II)
D.C. 36 V
30.2 - 30.8 kg
(66.5 - 67.8 lbs)
Bevel angle
0° 45° (right)
92 mm x 382 mm 44 mm x 382 mm
(3-5/8" x 15") (1-3/4" x 15")
107 mm x 363 mm 54 mm x 363 mm
(4-1/4" x 14-1/4") (2-1/8" x 14-1/4")
115 mm × 325mm 61 mm × 325 mm
(4-1/2" × 12-3/4") (2-3/8" × 12-3/4")
120 mm × 292 mm
(4-3/4" × 11-1/2")
92 mm x 268 mm 44 mm x 268 mm
(3-5/8" x 10-1/2") (1-3/4" x 10-1/2")
107 mm x 255 mm 54 mm x 255 mm
(4-1/4" x 10") (2-1/8" x 10")
115 mm × 227 mm
(4-1/2" × 8-15/16")
120 mm × 212 mm
(4-3/4" × 8-3/8")
92 mm x 185 mm
(3-5/8" x 7-1/4")
107 mm x 178 mm
(4-1/4" x 7")
115 mm × 155 mm
(4-1/2" × 6-1/8")
120 mm × 140 mm
(4-3/4" × 5-1/2")
Cutting capacity
203 mm
(8")
171 mm
(6-3/4")
-
-
-