Installation Instructions - Avintage AV22XI Manual De Utilización

3. INSTALLATION INSTRUCTIONS

Before using this appliance
 Remove the exterior and interior packing.
 Check to be sure the following parts are included: AV22XI, 3 wire shelves and 1 instruction manual.
 Before connecting the appliance to the power source, let it stand upright for approximately 24
hours. This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
 Clean the interior surface with lukewarm water using a soft cloth.
 When disposing your appliance, please choose an authorized disposal site.
 Place your appliance on a floor that is strong enough to support the appliance when it is fully
loaded.
 Keep the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.).
Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Extreme cold or hot ambient temperatures may also cause the appliances not to
perform properly.
 Adequate ventilation is required, do not block the front air outlet.
 Not designed for placement in adage or basement.
 The appliance is for indoor use only.
 This appliance is designed to be for built-in (fully recessed).
 This appliance is intended to be used exclusively for the storage of wine.
 This appliance is using flammability refrigerant. So never damage the cooling pipe work during the
transportation.
Attention
 Store wine in sealed bottles.
 Do not overload the cabinet.
 Do not open the door unless necessary.
 Do not cover shelves with aluminum foil or any other shelf material which may prevent air
circulation.
 Should the wine cooler be left empty for long periods it is suggested that the appliance is
unplugged, and after careful cleaning, leave the door ajar to allow air to circulate inside the cabinet
in order to avoid possible condensation, mold or odors forming.
CAUTION: please keep the appliance away from substance, which can cause ignition.
39