EGO POWER+ CS1600 Manual Del Operador página 47

Chain brake does
not engage.
Chain saw does
not cut properly.
Bar and chain
running hot and
smoking.
◾ ◾
Debris preventing full
movement of the chain
kickback brake handle.
◾ ◾
Possible chain brake
malfunction.
◾ ◾
Insufficient chain tension.
◾ ◾
Dull chain.
◾ ◾
Chain installed backwards.
◾ ◾
Worn chain.
◾ ◾
Dry or excessively stretched
chain.
◾ ◾
Chain not in bar groove.
◾ ◾
Check chain tension for over
tightened condition.
◾ ◾
Chain oil tank is empty.
◾ ◾
Debris in guide bar groove.
56V LITHIUM-ION CORDLESS CHAIN SAW — CS1600
◾ ◾
Clean debris from external chain
brake mechanism.
◾ ◾
Contact EGO Customer Service.
◾ ◾
Readjust the chain tension, following
the section: "ADJUSTING THE
CHAIN TENSION".
◾ ◾
Sharpen the chain cutters, following
the section: "HOW TO SHARPEN
THE CUTTERS".
◾ ◾
Reinstall the saw chain, following
the section: "REPLACING THE BAR
AND CHAIN".
◾ ◾
Replace the chain, following the
section: "REPLACING THE BAR
AND CHAIN".
◾ ◾
Check the oil level. Refill the oil tank
if necessary.
◾ ◾
Reinstall the saw chain, following
the section: "REPLACING THE BAR
AND CHAIN".
◾ ◾
Re-tension the saw chain; see the
section: "ADJUSTING THE CHAIN
TENSION".
◾ ◾
Filling bar and chain lubricant.
◾ ◾
Clear the debris in the groove.
47