Furman Pl-Pro Dmc E Manual Del Propietário página 8

must be prepaid by the purchaser of the product. Furman shall, at its own expense, furnish a replacement product or, at Furman's
option, repair the defective product. Return shipping charges back to purchaser will be paid by Furman. THE FOREGOING IS IN LIEU OF
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABIL-
ITY AND FITNESS FOR A PARTICULAR PURPOSE. Furman does not warrant against damages or defects arising out of improper use or
abnormal handling of the product, or against defects or damages arising from improper installation. This warranty shall be cancelable
by Furman at its sole discretion if the product is modified in any way without written authorization from Furman or Panamax Inc. This
warranty also does not apply to products upon which repairs have been affected or attempted by persons other than pursuant to writ-
ten authorization by Furman or Panamax Inc. THIS WARRANTY IS EXCLUSIVE. The sole and exclusive obligation of Furman shall be to
repair or replace the defective product in the manner and for the period provided above. Furman shall not have any other obligation
with respect to the products or any part thereof, whether based on contract, tort, strict liability or otherwise. Under no circumstances,
whether based on this Limited Warranty or otherwise, shall Furman be liable for incidental, special, or consequential damages. This
Limited Warranty states the entire obligation of Furman with respect to the product. If any part of this Limited Warranty is determined
to be void or illegal, the remainder shall remain in full force and effect.
SPECIFICATIONS
CURRENT RATING:
16 amps
OPERATING VOLTAGE:
180 to 274 VAC
OVER VOLTAGE SHUTDOWN:
275 VAC typically
SPIKE PROTECTION MODES:
Line to neutral, zero ground leakage
SPIKE CLAMPING VOLTAGE:
376 VAC peak @ 3,000 Amps, 266 VAC RMS
RESPONSE TIME:
1 nanosecond
MAXIMUM SURGE CURRENT:
6,500 amps
NOISE ATTENUATION:
10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz
Linear attenuation curve from 0.05 - 100 Ohms line impedance
DIMENSIONS:
44.45mm H x 482.6mm W x 266.7mm D.
WEIGHT:
5.5 kg
CONSTRUCTION:
Steel chassis, 3mm brushed and black anodized aluminum front panel; glass epoxy printed circuit boards
POWER CONSUMPTION:
25 VA
SAFETY AGENCY LISTING:
CE
8
PL-PRO DMC E OWNER'S MANUAL