Wet Vacuum - Cleaning - KUBOTA 54104 Manual Del Usuario

WET VACUUM - CLEANING

5
1. Verify that the power cord is disconnected from the outlet.
2. Loosen the locking latches.
3. Pull the supplied sponge filter over the filter basket for wet vacuum
cleaning, then pull down clips on the cover to lock.
4. Insert the suction hose in the hole on the side of the tank, turn the
hose connector, and connect the tube into the floor brush.
5. Insert the plug into the outlet.
6. Press the switch button and the vac will begin to work.
7. While in use you notice the bin is full resulting in significant decreases
in suction power, remove the plug from the electrical outlet and clean
the drum.
8. Unhook the two latches.
9. Remove the power head from the dust drum and remove filter.
WARNING:
ALWAYS DISCONNECT THE PLUG FROM THE WALL
OUTLET BEFORE REMOVING THE TANK COVER.
14.5 Gallon Wet & Dry Vacuum Cleaner with Blower
10
1 2
6 7
3 4
8 9
ENGLISH